Ultraflow Guide Rail Adaptor Claws
Ultraflow offers a range of guide rail claws that can be bolted to an Ultraflow sump pump and with the claw working on a Flygt / Xylem or Tsurumi guide rail system. This allows you to use a quality, competitvely priced Ultraflow sump pump in the place of a Flygt / Xylem or Tsurumi pump. Check out the compatability table below!
Our Selection
| Model | Flygt Guide Rail System | Flygt Models | Ultraflow Models |
| 50FLGA-105 | 50mm/2" | CP3045 MP3102 / 3068 / 3127 / 3085 | All Ultraflow Grinder Models With 50mm Outlet |
| 50FLGA-110 | 50mm/2" | CP3045 MP3102 / 3068 / 3127 / 3085 | All Ultraflow Grinder Models With SEG Outlet |
| 80FLGA-145 | 80mm/3" | CP3080/3085/3102/3126 DP2730/3068/3080/3085/3127 | All Ultraflow Models With 145mm PCD Outlet |
| 80FLGA-165 | 80mm/3" | CP3080/3085/3102/3126 DP2730/3068/3080/3085/3127 | All Ultraflow Models With 165mm PCD Outlet |
| 100FLGA-165 | 100mm/4" | CP3085/3102/3126/3127/3140 /3152/3170 DP3080/3102/3126/3127 HP5520/5530/5540 | All Ultraflow Models With 165mm PCD Outlet |
| 150FLGA-165 | 150mm/6" | CP3085/3102/3126/3127/3140/3152/3170 DP3080/3102/3126/3127/HP5520/5530/5540 | All Ultraflow Models With 165mm PCD Outlet |
| Model | Tsurumi Guide Rail System | Tsurumi Models | Ultraflow Models |
| 50TSGA-E | 50mm/2" | U - SF - N Series | Ultraflow 50mm Drainage, Cutter & Vortex Models |
| 50TSGA-F | 50mm/2" | B - C - UZ - MG Series | All Ultraflow Grinder Models with 50mm Outlet |
| 50TSGA-80F | 50mm/2" | SF Series | All Ultraflow Models with 145mm PCD Outlet |
| 80TSGA-F | 80mm/3" | B - BZ - U - UZ - C - SF - N Series | All Ultraflow Models with 145mm PCD Outlet |
| 100TSGA-F | 100mm/4" | B - U - UZ - N Series | All Ultraflow Models with 165mm PCD Outlet |
| 150TSGA-100F | 150mm/6" | B - U Series | All Ultraflow Models with 100mm - 165mm PCD outlet |
| 150TSGA-F | 150mm/6" | B Series | All Ultraflow Models With 240mm PCD outlet |
